|
|
IR-12ST-X -- IRIS Breakaway Connector The Intelligent Traffic System fiber optic breakaway interface connector is a revolutionary design that has been given the thumbs-up by Intelligent Traffic Engineers and members of the ISMA. This new connector installs in minutes, provides a water-proof, salt proof and dust proof connection, acts as a direct equipment interface and best of all, breaks away on contact to prevent collateral damage to components and cabling systems. Provide up to twelve optical interface connections that are totally maintenance free at the break away point, the IRIS connector meets all the requirements of NEMA 2TS for shock and vibration as well as numerous ANSI Standards for hazardous duty connector applications. The IRIS connector mounts to any 2”, 3” or 4” pedestal pad stub-up, leaving ample passage for other electrical cables to by-pass the breakaway connection. Designed for easy retrofit to existing cabinets, the IRIS can either be specified for new installations or adapted to older cabinets undergoing modernization. The IRIS breakaway connector automatically splits in half when a vehicle impacts the intersection cabinet, DMS or highway node. The top half of the connector stays with the cabinet while the bottom half, along with the drop cable attachment, remains undisturbed in the concrete base pad. Compared to the cost of collateral damage and increased incident management time, the totally “GREEN FRIENDLY” IRIS breakaway connector could easily be considered a real bargain.
IRIS Breakaway Connector Specifications |
| Part No. | Description | Options | Price | Buy Now |
| 6 CHANNEL IRIS CONNECTORS |
FM000748 -- AFL Poli-Mod™ Interconnect Modules New from AFL Telecom, Poli-MOD™ interconnect modules conveniently house pigtails and splice inserts for quick fusion splice connector installation inside fiber enclosures. These Poli-MOD™ modules are designed to fit into most standard wall and rack mount fiber enclosures. Each module comes pre-loaded with connector adapters, fiber pigtails and splice inserts.
Poli-MOD Module Specifications |
| Part No. | Description | Options | Price | Buy Now |
CS004515 -- FuseConnect Fusion Spliced Field-terminated SC Connector AFL Telecommunications' FuseConnect connectors are uniquely designed, featuring just four components. With a factory pre-polished ferrule, its innovative field-termination process eliminates polishing, adhesives and crimping in the field using the FuseConnect Installation Kit.
FuseConnect Specifications |
| Part No. | Description | Options | Price | Buy Now |
CS008237 -- FuseConnect Fusion Spliced Field-terminated LC Connector AFL Telecommunications' FuseConnect connectors are uniquely designed, featuring just four components. With a factory pre-polished ferrule, its innovative field-termination process eliminates polishing, adhesives and crimping in the field using the FuseConnect Installation Kit.
FuseConnect Specifications |
| Part No. | Description | Options | Price | Buy Now |
FX8811 -- Splice Tents These easy to setup portable splice tents provide quick shelter for splice techs in the field. Each tent is designed to prevent unwanted contamination in the splice case and fusion splicer during the delicate splicing process. Two models are available, the FX8811 has a single slit door and the FX-8812 features a double slit full width roll up door. |
| Part No. | Description | Options | Price | Buy Now |
IOC-2253 -- IOC Clean-Core Fiber Optic Connector Cleaner The compact, and ergonomic design of the IOC-2253 Clean-Core unit permits single handed operation. The operation of the Clean-Core unit is as simple as depressing the red lever on the side of the unit, which opens the protective cover, advances the cleaning fabric thereby exposing the next controlled strip of clean fabric.
The Clean-Core has been specifically designed to offer the user a revolutionary, portable, packet size cleaning solution for fibre optic connectors.
The Clean-Core is initially supplied with a removable cassette containing the fabric which supports 400 cleaning cycles. Replacement cassettes can be purchased and installed into the Clean-Core, by the simple operation of unscrewing two retaining screws on the side of the unit. The cleaning fabric has a super fine cross woven weave, which permits dry cleaning of fibre optic connectors, through the action of two wipes down the length of exposed cleaning fabric. |
| Part No. | Description | Options | Price | Buy Now |
| REPLACEMENT REELS |
2116-SAPTBP -- MultiLink Plastic Adjustable Sno-Shoe Fiber Optic Cable Storage Bracket The Multilink Plastic Adjustable Sno-Shoe® has been designed for slack storage at 90 degree location where the pole turns a corner. The 16” (40.6cm) diameter circle design allows two half circle units to be installed on the strand. The half circle design can be adjusted to the desired coil length. The wide channel allows for the coil to be wrapped numerous times. The Plastic Adjustable Sno-Shoe® can be adjusted to a captive length of or it can be separated to a desired length without being captive. In addition, the Plastic Adjustable Sno-Shoe® still serves as a safeguard, protecting the minimum bend radius of the fiber optic cable while establishing proper installation practices. The Multilink Plastic Adjustable Sno-Shoe® is a durable and cost effective tool for storing fiber optic cable. |
| Part No. | Description | Options | Price | Buy Now |
| 24" ADJUSTABLE SNO-SHOES |
| EXTENSIONS |
| STACKING KIT |
VASSB -- MultiLink Mini Sno-Shoes The Multilink Mini Plastic Sno-Shoe was designed to store slack drop fiber optic cable. This unit can be used aerially, wall mounted, or used in a vault to neatly store excess cable. It protects a minimum bend radius of 3.5” (8.89cm). |
| Part No. | Description | Options | Price | Buy Now |
FiBO250-KIT -- FiBO 250 Interferometer FiBO™ 250 Series offers a solid and economical solution to automated fiber testing by bringing together full 2D visual inspection capabilities and true phase-shifting interferometry to achieve exceptionally accurate measurements. A fixed focal length 10x magnifier assures maximum system stability and a very high level of repeatability.
kit includes
- FiBO™ 250 hardware
- FiBO™ CODE software
- Two (2) kinematic adapters (choose from currently available mounts)
- Three (3) Calibrated alignment targets (2D, 3D, Apex Offset)
- Laptop or desktop computer
- Hardware key
- USB 2.0 connection cable
- Rugged portable case
- User manual
- Warranty on hardware
FiBO 250 Specifications |
| Part No. | Description | Options | Price | Buy Now |
CS004154 -- AFL SpliceConnect™ Mechanical Splices AFL Telecommunications SpliceConnect™ is a mechanical splice that provides an inexpensive, quick alternative to mating fibers. Using V-groove technology, this splice maintains physical contact between the fibers. An assembly tool is used to ensure the fibers are mated correctly, resulting in <0.1dB insertion loss (typical for single-mode). The SpliceConnect™ secures both fiber and coating independently with the U-shaped sleeve, enhancing the strength against fiber twist.
SpliceConnect™ Mechanical Splice Specifications |
| Part No. | Description | Options | Price | Buy Now |
| ASSEMBLY TOOLS |
| MECHANICAL SPLICE KIT |
|
